Recent Jobs

Mold Remediation Case Study in Hackensack, NJ

Mold Remediation Case Study in Hackensack, NJ

As part of our ongoing mission to offer the best mold removal services, FDP Mold Remediation of Hackensack recently took on a difficult job on Orchard Street, Hackensack, NJ 07601. We are happy to share our latest success story with you. We have been in the mold removal business for over twenty years. This Q&A will give you an inside look at how we dealt with the mold problem, showing off our professional method and skill.

  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey
  • Water Damage Restoration in New Jersey

Q: In what city, suburb, or area did the mold job take place?

This job to get rid of mold happened in Hackensack, NJ, a lively city known for its diverse population and beautiful scenery.

Q: Can you tell us more about the mold problem? Where did it go? What was making it happen?

Of course! The problem with mold was found in a home on Orchard Street, Hackensack, NJ 07601. The mold growth was mostly caused by too much moisture that had built up over time. This problem with moisture was caused by several things, such as inadequate air and a plumbing leak.

Q: What did the customer want? Or what did they want to achieve with this project?

The customer's main goal was to have a healthy living space free of germs. They were worried about the possible health risks of mold and wanted a professional mold remediation expert to get rid of the problem quickly and correctly.

Q: Can you walk us through the steps you took to get rid of the mold here?

Of course. Our mold remediation process is thorough and follows best practices in the industry:

Step 1: Take a Sample of the Indoor Air

To find out how bad the mold pollution was, we started by checking the quality of the air inside our home.

Step 2: Take a Sample of the Surface

Samples of the surface were taken to find out what kinds of mold were there and how much of each type there was.

Step 3: Take a reading of the moisture level

We used special tools to find the source of the moisture and humidity that was causing the mold to grow.

Step 4: Containment and Negative Pressure

We used 6-mil plastic sheets to cover over 700 square feet of affected space to make containment areas that stopped mold spores from spreading. Negative air pressure was set up to keep mold spores in these places from leaking through the air.

Step 5: Mold Remediation

This meant getting rid of polluted materials that couldn't be fixed, like carpet, drywall, and ceiling tiles. To avoid cross-contamination, the right ways to get rid of the waste were used.

Step 6: Final Cleaning

The affected areas were cleaned and sanitized thoroughly to get rid of any mold germs that were still there.

Step 7: Fogging with antimicrobials

We put antimicrobials on the areas we had cleaned to stop mold from growing and stop contamination from happening again.

Step 8: Use an EQ air scrubber

For four days, we used three HEPA 500cfm air scrubbers to make sure that any mold spores that were still in the air were completely gone.

Q: Once you get rid of the mold, what steps need to be taken to ensure the mold does not return?

Stopping mold from coming back is very important, and it's a very important step to take after mold removal. For people who want to keep their homes mold-free, we recommend the following preventative steps:

  • Tackling the Source of Moisture: Quickly fix any sources of wetness, like leaks or not enough airflow, to get rid of the conditions in which mold needs to grow.
  • Regular Property Inspections: Even after getting rid of mold, you should still check and keep your property for possible moisture problems to stay one step ahead of any issues that might come up.
  • Proper Ventilation and Humidity Control: To keep mold from coming back, make sure your home has good ventilation and that the humidity levels are kept in check.
  • Monitor Indoor Humidity Levels: Keep a close eye on the humidity levels inside and try to keep them in the recommended range to stop mold from growing again.
  • Periodic Mold Inspections: Do mold checks regularly to find problems early on and stop them from growing into big mold infestations.

Q: Was the customer pleased with the final results?

In fact, making sure the customer was happy was our main goal. They told us they were so pleased with how our mold removal service turned out. Our unwavering dedication to professionalism and care for detail made an impact that will last. Notably, we solved their mold problem in a complete and long-lasting way. There was no more mold in the house after that, and the quality of the air inside got a lot better.

Q: Any final words or advice you could give people here?

Without a doubt, we have some good tips to give. It is very important to understand how bad mold problems are and take care of them quickly and properly. Mold is not only bad for your health, but it can also damage buildings. Do not wait if you think mold is growing in your home or business. Get in touch with a licensed mold removal company in Hackensack, like FDP Mold Remediation. Our team of experienced professionals is committed to resolving the issue in a way that makes your property safe and healthy in the long run. We care most about your peace of mind.

4.7
Great Reputation!Customer service and fair price
Based on 23 verified reviews on google

Project Details:

Orchard St, Hackensack, NJ 07601
Sep 21, 2023
Oct 03, 2023
Avraham S.
New Jersey
Water Damage Restoration

Project Outline:

Mold was discovered in the home's laundry room, the master bathroom, and in the other bathroom off the hallway. This project included:

  • Mold Testing and Inspection - Indoor air sample.
  • Mold Testing and Inspection - Surface sample.
  • Mold Testing and Inspection - Moisture reading.
  • Mold Remediation - Visual inspection on-site.
  • Mold Remediation - PPE.
  • Mold Remediation - Containment and negative pressure - 6 mil. plastic sheet > 700sq ft.
  • Mold Removal - Carpet, drywall and ceiling removal.
  • Mold Treatment - Antimicrobial fogging
  • Mold Treatment - EQ air scrubber HEPA 500cfm for 4 days with Hepa filter.
  • Mold Restoration - Final cleaning.
  • Mold Restoration - Trash disposal
Avraham S. - General Manager
General Manager in New Jersey & New York
Complete Mold Inspection and Remediation Service
Mold Assessor # 23-6TOFA-SHMO
Mold Remediator # 23-6TOF3-SHMO
4.7
Great Reputation!Customer service and fair price
Based on 23 verified reviews on google
contact us now!
Call for immediate action!
or contact us via form
Recent Projects
Mold Mitigation Job in Teaneck, NJ 07666
02/2024 | Roosevelt St, Teaneck, NJ 07666
The project was in Teaneck's home with mold in the basement.
Read more
Mold Remediation Job in Elizabeth, NJ 07201
01/2024 | North Ave, Elizabeth, NJ 07201
The project was in two office trailers in North Avenue, Elizabeth, NJ 07201.
Read more
Mold Removal on Central Avenue
10/2023 | Central Ave, Newark, NJ 07103
This project was for a house on Central Ave in Newark, NJ, 07103, where mold was visible by the windows, stairs, and in the hallway.
Read more
Call FDP Mold Remediation for immediate action!
Get All Mold Related Answers Found Mold?? Don't Wait!
contact us
It's not always a good time to make a call. Send us your information and tell us when we should call you, and we'll get back to you at your convenience.
Best time to reach you?
Call us anytime for an immediate response!
551-243-7170
Hours: Mon-Sun 8:00am - 8:00pm