Mold Remediation Union, NJ

Causes of mold in homes

Moisture is the main cause of mold growth in homes. It grows behind doors, above the ceiling, on window frames, on floors, furniture, insulation clothes, basement and air ducts such as air conditioning and heating systems. They can actually, grow in 24-48 hours with the following conditions are right.

• Mold spores
• Food source like wood and cotton
• Darkness
• Warmth
• Oxygen
• Humidity (water leaks)

How to get rid of mold

1. Record the mold problem and create a mediation plan
Before you begin the remediation process, document the mold and mildew situation. FDP Mold Remediation of Union will use documentation to develop a remediation plan.

2. Calculate the extent of mold contamination
The area contaminated with mold is calculated to choose how the best plan for the mold remediation process. The main goal of mildew removal is to clean up the mold growth within the home and to ensure that homeowners are not exposed to more mold infestations.

3. Isolating of the infested areas
Based on the calculation of the contaminated areas, the Union mold remediation expert will determine what area size they are going to work on. They follow these guidelines:

• Remove any standing water to prevent more mold spores from spreading and growing.
• Remove all wet materials and damaged porous materials.
• Discard all wet and moldy materials in plastic bags. These receptacles are swabbed with a moist cloth and purification solution ahead of leaving contaminated area.
• All moldy surfaces are cleaned using a wire brush and then mopped with disposable wipes.
• All surfaces are vacuumed with a HEPA (High-Efficiency Particulate Air) vacuum.
• A visibility test is done to ensure all areas are free from contamination and debris.
• Cleaned materials are dried using humidifiers so that leftover moisture is evaporated.
• The homeowner is advised whether materials moved during the cleanup process should be replaced or repaired.

4. Determine a successful cleanup
After the mold is gone, the authorized team should determine if the cleanup process was a success. This is done by orderly check-ups to homes where the mold abatement was done.

Mold Remediation in Union, NJ

Professionals at FDP Mold Remediation of Union will explain into details in a layman's language what abatement project is all about. Our mold specialist will give basic information and make sure you grasp it all. This is to raise trust in us as our policy is on honesty. Once hired we will follow these procedures:

1. Wear safety gears which are a full protective suit.
2. Seal off the working area using plastic sheeting and have a signboard written to warn passers-by that there's work going on.
3. Use quality equipment such as HEPA.
4. Clear the air from airborne mold spores using HEPA.
5. Use HEPA filters when vacuuming.
6. Discard moldy porous building materials.
7. Use an antimicrobial chemical to clean any remaining mold stain.

Hiring FDP Mold Remediation of Union is the best choice made for homeowners. We provide professional mold inspection, removal, cleaning and remediation across the Union, NJ area. We do not push for unnecessary testing. We advise on what work will be done at a fair price. For more information contact us at 908-332-9127.